High‑Yellow‑Resistant Fumed HTV Silicone Rubber: Multi‑Hardness Grades for Kitchenware & Wearable Products

Hits: 1642 img

For downstream applications of high‑temperature‑vulcanized (HTV) solid silicone rubber, such as protective sleeves, kitchen accessories, silicone watch bands and leatherware silicone inserts, requirements cover yellowing resistance, transparency and mechanical strength. Conventional fumed silicone rubber tends to turn yellow after thermal processing or long‑term service, which damages finished appearance and market competitiveness. The high‑yellow‑resistant fumed HTV silicone rubber series addresses this industry pain point with hardness ranging from 25 Shore A to 80 Shore A, delivering material solutions for diversified silicone goods.

This series features semi‑transparent appearance. Reinforced by fumed silica, it combines high mechanical strength, good transparency and favorable processability. It complies with RoHS, REACH and LFGB requirements for consumer and food‑contact articles. A 1 % loading of 50‑percent‑active dicumyl peroxide is recommended. Standard curing condition is 175 °C for 5 min under 15 MPa for 2‑mm test specimens.

Typical property data show low‑hardness grades (25‑40 A) deliver ultra‑high elongation up to 950 %, ideal for flexible components under repeated bending. Medium‑to‑high‑hardness grades (50‑70 A) reach tear strength up to 30 kN/m, well‑suited for watch bands and structural parts subject to cyclic tension. The 80 A grade targets rigid protective sleeves. Density varies from 1.08 g/cm³ to 1.22 g/cm³ along hardness. Plasticity values range from 100 to 310 across grades, facilitating mixing and compression‑molding parameter tuning.

Packaging is 20 kg per carton. For unopened goods stored below 50 °C, shelf‑life is 18 months from production date. Expired material shall be fully performance‑tested before production to verify compliance with end‑product specifications prior to mass usage.

Note: listed values are typical laboratory data and shall not be adopted as formal purchase specifications. Acceptance criteria should be confirmed during sampling. Besides raw‑material performance, actual anti‑yellowing outcome depends on peroxide selection, post‑curing procedure and oxygen level in processing environment. Process validation under real manufacturing conditions is strongly suggested.

Keywords: fumed HTV silicone rubber; high yellow‑resistant silicone rubber; food‑contact solid silicone; raw material for silicone watch band; compression‑molding fumed silicone rubber


high anti-yellowing fumed silicone rubber,pls check IOTA HTV 317

Online QQ Service, Click here

QQ Service

What's App