P-type rubber waterstop A: water swelling rubber waterstop A: professional production of rubber waterstop for deformation joint
Hits: 3897147
2020-05-04
P-type rubber waterstop A: water swelling rubber waterstop A: professional production of rubber waterstop for deformation joint
Brief introduction of p-type rubber waterstop: p-type rubber waterstop and gate water seal are an important part of the gate of hydropower project, and they are the key parts to ensure the normal operation of the sealed water of the gate. Rubber gate water seal is also called waterstop rubber, which has the advantages of good elasticity, strong adaptability to deformation, simple structure, tight and reliable water seal, relatively economic, simple installation and replacement, aging resistance, and use Long life. Gate water seal is an important part of the gate in Hydropower Engineering, and it is the key part to ensure the gate seal water and normal operation. The most commonly used sealing material can be selected according to the specific conditions of water head and orifice size.
Rubber gate water seal, also known as water stop rubber or water stop rubber, has the advantages of good elasticity, strong adaptability to deformation, simple structure, tight and reliable water seal, relatively economic, simple installation and replacement, aging resistance, long service life. Product performance and characteristics: This product uses the high elasticity and compression deformability of rubber to produce elastic deformation under various loads, so as to tighten and seal, effectively prevent water leakage and seepage of building components, and play a role of shock absorption and buffer. So as to ensure the service life of engineering buildings.
There are two types of materials for rubber seals of sluice. Type 1 gate water seal: natural rubber or natural rubber based materials. Sf6674 is applicable to large-scale engineering gates; sf6474 is applicable to medium and small-scale engineering gates and expansion joints. Type 2 Gate water seal: synthetic rubber or synthetic rubber based material. It is suitable for engineering gates with a small amount of acid, alkali, oil or sea water in the water.
Product use: A, for infrastructure projects, underground facilities, tunnels, culverts, water conservancy, subway and other projects. b. Gate, dam bottom, construction engineering, underground buildings and other expansion concrete casting.
Water swelling rubber waterstop: water swelling rubber waterstop is a kind of rubber waterstop product, which is made of imported special rubber as the main raw material, with more than ten kinds of special materials such as inorganic water absorption material and high viscosity resin, through internal mixing, mixing and extrusion.
Brief introduction of deformation joint rubber waterstop: deformation joint rubber waterstop is to use the high elasticity of rubber to produce elastic deformation under various loads, so as to play a solid seal, effectively prevent the water leakage of the building structure, water seepage and play a role of shock absorption and buffer. In many engineering design, there are certain expansion requirements between civil engineering and soil and water structure, and there are some problems such as waterproof and shockproof, so adopting and installing rubber waterstop is an effective way to solve the above problems.
This product is mainly used for the foundation engineering, underground facilities, tunnel culvert, water aqueduct, retaining dam, etc. which are set in the construction joint and deformation joint when the concrete is cast in situ, and integrated with the concrete structure, to ensure the service life of the project construction.