Everyone must know that the silicone mold has a high probability of deformation after a long time of use. Once it is deformed, its use value will be greatly reduced. The deformation of the silicone mold has a reason and is directly related to the maintenance during use. What causes the deformation of the silicone mold? There are three main reasons for the deformation of the silicone mold, which are aging maintenance, the content of silicone oil, and irregular maintenance.

1. Aging maintenance

Silicone molds are aging without regular maintenance, and such molds are prone to deformation. If silicone molds are not completely aged and maintained, not only deformation, but also their service life and quality will be greatly reduced.

2. The content of silicone oil

The content of silicone oil actually directly determines the quality of silicone rubber. If too much silicone oil is added during the processing stage, the viscosity of the silicone oil will be too high. If the content of silicone oil is too small, the quality of the silicone will be poor. Therefore, the content of silicone oil will directly determine whether the silicone rubber is easily deformed, which is a quality reason.

3. Irregular mold maintenance

Silicone molds need maintenance to prevent deformation, but irregular maintenance will also lead to deformation, what is going on? During the maintenance process, especially in the aging maintenance stage, if the silicone rubber mold has not been properly fixed, the mold needs to be The outer mold or the inner mold is bound together and fixed, so that it can completely prevent deformation during the aging and maintenance stage.

Through the above analysis, you must always carry out correct maintenance when using silicone molds, and you need to mix silicone oil according to the performance of the product to prevent poor product quality.