Silicone is actually a kind of special rubber in rubber, and it is the one with high usage rate at present. Organic silica gel is divided into room temperature vulcanization and high temperature vulcanization. The room temperature vulcanization type is more commonly used because it cures without additions and is simpler to apply.

Silicone Features:
The one-component silicone can be used in the metal field after curing, mainly for bonding and fixing, and will not corrode the metal, and it has strong bonding performance for many years. And it has good insulation performance, which can strengthen the insulation index of electronic products or electrical appliances, making it safer to use.

Because silicone is a one-component glue, it is more convenient to operate, suitable for both manual construction and machine construction. As long as it is exposed to moisture in the air, it will cure, and the operating time at room temperature is sufficient, which is suitable for mass production needs.

After curing, the silicone will neither corrode the metal nor affect the human body, and it is an environmentally friendly product. However, not all brands have reached the environmental protection level, and users need to look for and choose.
Although silicone has a wide range of uses, but the procedures are correct, otherwise there will be various accidents. The correct construction method is as follows:

1. First of all, it is necessary to ensure that the substrate to be bonded is clean.

2. Because the silicone is packed in a sealed tube, you need to remove the cover and replace it with a tip.

3. Cut the beak according to your needs. Do not cut too many beaks, otherwise it will result in a large amount of glue.

4. Aim at the object to be bonded, and squeeze out the corresponding glue.