IOTA corporation ltd
Generally, after the silicone products are molded by silicone rubber manufacturers, before they can be packaged and placed for a period of time, the surface of the products will absorb a layer of dust......
2022-07-05Silicone rubber is an important medical polymer material, mainly used in the field of medical catheters. The aging process of my country's population drives the demand for medical silicones, and the m......
2022-07-05Heat-resistant silicone rubber Heat resistance is one of the remarkable properties of silicone rubber. Its high temperature resistance depends on the molecular skeleton of silicone rubber raw rub......
2022-07-04The main reasons for the "self-sulfur" during the placement of the compound are: (1) Too many vulcanizing agents and accelerators are used; (2) The glue loading capacity is large, the temperature ......
2022-07-04Room temperature vulcanized silicone rubber (RTV) is a new type of silicone elastomer that came out in the 1960s. The most notable feature of this rubber is that it can be cured in situ without heatin......
2022-07-01MS glue is the abbreviation of silane-modified polyether glue. It is mainly a one-component or two-component elastic sealant made of MS polymer as the base polymer, combined with fillers, plasticizers......
2022-07-01Rubber overvulcanization: refers to the state of the rubber compound at high temperature for a long time. Dead rubber: the early vulcanization of the compounded rubber with vulcanizing agent due t......
2022-06-30Brief introduction of vacuum insulation board: VIP panel is vacuum insulation panel, which is the abbreviation of English Vacuum Insulation Panel. It is a kind of vacuum insulation material. It is c......
2022-06-30Thermally conductive silicone is mainly used in the heat conduction and heat dissipation function of heat-generating components. The performance of ordinary thermally conductive silicone depends on th......
2022-06-291. Product introduction: Traditional liquid silicone rubber has poor wettability to various substrates and lacks reactive groups, so the molecular force between the traditional liquid silicone rub......
2022-06-29With the automation and linkage of rubber industrial production, high temperature rapid vulcanization systems are widely used. Such as injection vulcanization, cable vulcanization, etc. The so-called ......
2022-06-28Secondary vulcanization is also called post-vulcanization or two-stage vulcanization, which refers to the process in which rubber products reach a certain degree of vulcanization, and the heat source ......
2022-06-28Heat transfer film is very common in life, such as the pattern on the T-shirt. The production process is to transfer the pattern of the film to the surface of the carrier through preheating pressure, ......
2022-06-27At present, the silicone oil products commonly used in cosmetics mainly include dimethyl silicone oil, methyl phenyl silicone oil, cyclic silicone oil, hydroxy silicone oil, polyether silicone oil and......
2022-06-27RTV silicone rubber is not only odorless, non-toxic, not afraid of high temperature and resistant to severe cold, but also has good electrical insulation, oxygen resistance, aging resistance, light re......
2022-06-24
