In silicone products, its silicone molding technology is the primary prerequisite. Different silicone molding technologies have different impacts on silicone products, making them suitable for different industrial fields. The next thing to talk about is some basic introduction to mixing silicone. Including the application of mixed silicone rubber technology and the molding process of mixed silicone rubber.

Mixing silicone rubber molding process method, molding: First, the rubber material is cut into a certain shape and filled into the mold cavity. The mold is placed between the upper and lower plates of the heated flat vulcanization machine, and heated and pressurized according to the specified process to vulcanize the rubber material. The mold is taken down to obtain a section of vulcanized silicone rubber product. Transfer molding: The prepared rubber material is loaded into the upper plug cylinder of the mold, heated and plasticized, With the help of plunger pressure, the rubber material enters the heating mold cavity through the casting port for molding. Injection molding: Place the rubber material into the machine barrel for heating and plasticizing, and directly inject the rubber material into the closed mold cavity through a plunger or screw through a nozzle, achieving rapid on-site vulcanization under heating.

Extrusion molding: A continuous molding process in which mixed silicone is forcibly extruded into a certain cross-sectional shape through a die.

Regarding silicone rubber, please check the details:
https://www.htvsilicone.com/product-general-purpose-precipitated-type-silicone-rubber-for-extrusion-.html